 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LCM1210R2 Molded Chip Inductor .126" .012" 3.20mm .3 .086" .012" 2.20mm .3 .020" .008" .5 mm .098" .012" 2.50mm .3 .067" .003" 1.7 mm FEATURES Small molded chip inductor Special ferrite core ensures stable inductance against temperature humidity Broad inductance range High Q Highly reliable Excellent for flow, re-flow soldering, and soldering iron CHARACTERISTICS INDUCTANCE RANGE .01 H to 330 H APPLICATIONS TV's, VCR's, and audio equipment Disk drives and other computer periferals Personal computers Electronic control boards for automobiles Telecommunication devices TOLERANCE 10% over entire range. 5% available upon request CURRENT RATING Based on current flow and temperature rise of 20C maximum at 80C ambient temperature. TESTING PROCEDURE Inductance, Q, and SRF measured by HP4191A Impedance Analyzer with 16092A Test Clip at specified frequency. DCR measured with digital milliohms meter. DIELECTRIC STRENGTH 1000 v olts DC between both terminals and package of coil for 5 seconds. SOLDERABILITY 95% of the terminal is covered with solder. Please refer to page 2 for soldering recommendations. 260C for 10 seconds after 120C preheat cycle for 5 minutes. -25C to 85C where inductance and Q shall not change more than 20%. SOLDERING HEAT: RESISTANCE TEMPERATURE CHARACTERISTIC STORAGE TEMPERATURE Store at normal tempera ture (-5C to + 35C) and normal humidity(85% RH max) inoriginal package. Do not expose to direct sunlight or harmful gas. This inductor can maintain its characteristics in a storage temperature from -40C to + 125C for a period of 90 days. HUMIDITY CHARACTERISTICS There is no change in performance at a humidity condition of 90-95% RH in 500 hours. Measurement shall be made after 1 hour stabilization at room temperature. HEAT RESISTANCE Subjected to 100C for 1000 hours without change in appearance, deformation, or perf ormance. Measurement shall be made after 1 hour stabilization at room temperature. THERMAL SHOCK Subjected to 100 c ycles at the following temperature range without a change in performance: -25C for 1 hour + 100C for 1 hour. Measurement shall be made after 1 hour stabilazation at room temperature. TERMINAL STRENGTH Meets 3 lbs. pull test RESISTANCE TO SOLVENT No change in appearance when dipped into alcohol or fr on for 3 minutes. e MARKING Part is mar ked with inductance value in EIA code. Tape and Reel only. PACKAGING |
Price & Availability of LCM1210R2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |